What You Get - A negative ion generator, also known as an anion generator or static field generator that you can use anywhere you need a powerful static field. Especially great for static grass applicators.

You also get a book that gives you step by step instructions on how to build and inexpensive, powerful, and versatile static grass applicator. And with that you get direct contact information for personal help if you have questions or need help.



Specifications - Voltage Input: 4vDC to 12vDC -/- Static Field Output: 6kvDC to 15kvDC (Output field varies with the input voltage. With a 12vDC input, output is a nominal 12 to 15kv DC.) -/- Size: Body 6 x 3 x 4 cm, Base 8 x 4.5 x .3 cm -/-  Weight - 109 grams -/- Wire Lengths - 30 cm


Power Supply - Use any 12v DC power supply with a current output of at least .5 amp. Most small transformers for electric gadgets will work - for example something like a phone charger.  This is not a transformer so it does not pass current.  It charges and creates a static field. So current supply is not really that important.  1.5 amp is perfectly suitable.


Main Features


To save you time, the main features are presented in bullet point form here.  They are fully explained further down in the page.


  • Makes A More Powerful Static Grass Applicator Than Many Much More Expensive Commercial Applicators.

    Designed and manufactured especially for homemade static grass applicators.

  • Wiring of the unit is arranged especially for static grass applicator construction.

  • With it you can quickly build a low cost, static grass applicator with a lot of useful working end options.

  • A powerful unit that makes laying grass easy. No grass flying all over the place.

  • 12 vote DC input so that you do not have to work with 110v or 220vAC power.

  • Unique variable input to output voltage control allows you to work at output voltages as low as 6kvDC

  • Free, complete, illustrated book on how to make static grass applicators included as a bonus.



Comments - Here are a couple comments that we hope will give you a feel for how good this unit is.


Begin Comments - "It works! I have a Noch Grassinator, a Flockbox a flyswatter static grass applicator and I bought the Grassking Static Field Generator and it is by far the best I have used and it is the most versatile."


My train group has been converted to using the Grassking pictured here. We have had excellent results using it and I would highly recommend it to anyone working with static grass! The service has also been great. It comes with excellent instructions. I have bought the kit which goes together very quickly and one diy for another project. Both have worked flawlessly!


Thank you Gary. The machine is our favorite. One of the two I ordered was for a man who did electronic repair for a living!


Our group loves them. We call my original one the Death Star! We are now using a 7.5 volt regulated power supply.


It still puts out a great charge! We really like them and I’m sure there will be more orders from us. We used the third one with a regulated 7.5 regulated power supply and it worked great!


My train group is really impressed with the generator." - End Comments



Shipping - For North American customers, we ship from a warehouse in Massachusetts .  Delivery time is a coupe days.  For worldwide customers, shipping is from Warsaw, Poland. Delivery time is generally 5 to 15 days, depending on your location.  For customers from Poland, contact us for local delivery information and local shipping rates.




Add it to your cart now or continue reading detailed explanations below. Customers from Poland contact us first.



Details


Makes A More Powerful Static Grass Applicator Than Many Much More Expensive Commercial Applicators.
The 15kv static field is amazingly strong.  And when you make a static grass applicator following our directions, you will get results like the people at the clubs referenced in the comments above.


Designed and manufactured especially for homemade static grass applicators.

A large number of other negative ion generators are designed to be used in air conditioners, fly swatters, vacuum cleaners and air purification equipment.

This negative ion generator/anion generator was designed specifically to be used in static grass applicators. It can, of course, be used in any other application but its main purpose is to power versatile, quality static grass applicators.

With it you can make a static grass applicator that will outperform most of the static grass applicators on the market.



Wiring of the unit is organized especially for static grass applicator construction.

Most anion generators on the market have two output leads, some with special tips, that are designed for use in air conditioners, vacuum cleaners and the likes. You have to do some modifying to make them useful.

This unit differs in that the wiring is such that there is a single lead on the output side which leads is to be attached to the static grass container. The voltage on that lead is -15 kV DC.

There is a green lead that is the ground lead to be used to connect to the surface on which the static grass is being applied. Making such a connection assures full potential and best utilization of the maximum voltage output. That makes the grass stand up very well.

The power input leads are separate and distinct.

It is very easy to wire your unit.



With it you can quickly build a low cost, static grass applicator with a lot of useful working end options..

For little more than the cost of this static field generator, you can build your own custom static grass applicator.

Using the examples presented in the free instruction guide that comes with this static field generator, you can build just what you need to do exactly what you want to do. Get into tight places, lay as little or as much grass with one pass, add layers, make flowers, grass tufts, add "snall branches" to wire trees and so on.

And the matter how you configure it, your static grass applicator will work wonderfully well.



How To Use It

Here is a video of a DIY static grass applicator, that was made using this anion generator.






A powerful unit that makes laying grass easy. No grass flying all over the place..

The higher the static field, the more pull there is to make the grass stand up just where you want it. No more wasted grass flying all over the place.

For you that means that you won't have grass laying down in the glue. And you won't have to go over your work with a vacuum cleaner to stand the grass up - a process recommended by many people using other applicators.

And, if you are going to make grass tufts ( "everyone" does ) or flowers ( many do ), you want your grass standing as straight and high as possible. That goes for short grass that you will top with scatter to make weeds.



12vDC input so that you do not have to work with 110 or 220vAC power.

When working with electricity, safety should always be your first concern!

Simply stated, it is better to work with a 12vDC low current source than a 110 or 220vAC high current source.

And as a practical matter, 12vDC is all around your layout. You can connect to your power pack, the track, accessory bus, etc..

Whatever is convenient. There is no need to be hauling an extension cord around just so you have 110 or 120 vAC for your static grass applicator.



Unique variable input to output voltage control allows you to work at output voltages as low as 6kvDC

When we designed this, we took into consideration feedback from beta testers that sometimes it might be useful to work with lower output voltages or lower input voltages.

So you get a unit whose output voltage varies with the input voltage. With a 12vDC input, output is a nominal 12 to 15kv DC.

You can use any input voltage from 5vDC to 12vDC. The output will vary from 4kvDC to 15kvDC. The higher the input voltage, the higher the output voltage.

So you have a lot of flexibility for your application.



Free, complete, illustrated book on how to make static grass applicators included as a bonus.

You get a fully illustrated, step-by-step guide to making static grass applicators included with your kit. It has pictures and links to videos so you can even customize this already versatile unit.

Using this guide, it is just a matter of following the simple steps to have your great static grass applicator.


You won't go wrong with this one. It's a good choice.  It's guaranteed.  And after having sold hundreds of these, we have never had a return.


Buy it now. If you don't like it, we pay the return postage plus 100% refund.



Qty:  



Write a review

Please login or register to review

StaticGrassKing Static Field Generator For Static Grass Applicators 15kvdc Output - Plus Free Plans

  • Product Code: anion15kv
  • Availability: In Stock
  • $14.99


Tags: ion, electrostatic, generator, static field, static grass, DIY

co.uk -->